For modifying the wireless scale weight unit. Hold the unit and press the button at the rear of the scale for several minutes. A couple of minutes. Then press the button to switch your unit. Make sure that the right unit is displayed in the display that is on your device. Find the pounds/kilogram (lb/kg) button on the scale, near the upper part of the scale. Choose the lb and kilogram weight readings as you prefer. This weigh scale can now be weighed by the user in kilograms and kilograms in the manner indicated.

Silky Terrier Dog Breed Playing Aro... Silky Terrier Dog Breed Playing Around

1. Take all batteries off the rear of your scale.
2. The scale should be left without batteries for at least 10 minutes.
3. Re-insert the batteries.
4. Set your scale on a smooth, flat surface that is free of carpet.
5. Make sure you press the middle of the scale with one foot to move it.
6. “0.0” will appear on the screen.

The scale is set to be able to measure by pounds or inches ( LB). Move the switch on the scale’s topside to the left or right position to change the scale’s measuring units to kilograms or centimeters (kg). If the LCD shows “Lo”, replace the battery by putting”Lo” and then the “+” sign up. It’s a shorthand version that translates to “pounds weight” but isn’t an abbreviation for pounds. The word”lb” is an abbreviation of the Latin word libra. This could refer to a pound, being a simplified version of the full term”libra pondo” or “pound weight”. Steps Set your scale upon a solid and level surface. Place two or three mouse pads from a computer across the surface of the table. Set your own scale onto the mousepad, and turn on the device. Hit”Zero,” or “Tare” on your scale “Zero” or “Tare” button on the scale. Check that your Scale is set to “calibration” mode.