It is done by moving the knob until it is in the position of Pilot. Continue pressing down on the knob, and press on the ignition switch at least once every second. When the pilot light is on stop press on the ignition switch. Continue pressing to turn the dial for thirty minutes. Then, gradually release your control knob.

Silky Terrier Dog Breed Playing Aro... Silky Terrier Dog Breed Playing Around

If the process doesn’t produce the flame being ignited then repeat the procedure after a couple of minutes. It could take a while for the gas to enter the fireplace, especially if it’s been a while since this happened. If you’re still not able to bring the pilot light to start to light. It could be that you are not by the knob that is black and labeled pilot for long enough for the pilot light to stay illuminated. If this doesn’t allow the pilot to remain illuminated, it could be due to unintentionally loose wire or pinched, disconnected, or during the installation.

Check that the Piezo wire (orange) is connected to the Piezo (red button) and that the Piezo locking nut isn’t loose. When the Pilot Light is lit, flip your valve into the “On” position and you can enjoy your gas burner.

The majority of people switch the light on and off only each year when temperatures drop, and sometimes, it won’t immediately start to spark. If that is the case then you’ll need to keep the valve in place for 3 to 5 minutes, sparking it every 10-15 seconds. This will eliminate air from the line. Once the line is lit, hold the valve in order to warm the thermocouple within the insert.

A Kozy heat gas fireplace is the ideal method to bring value and comfort to your home. With a variety of styles and models, you’ll be able to locate the ideal fireplace that meets your requirements. Find Kozy Heat, the Kozy Warm Fireplace that is compatible with the requirements of your heating system and design.