There are a few things that you can do in order to reset your convertible top BMW E46. The first thing that you need to do is to locate the convertible top module. It is located near the backseat on the driver’s side. Once you have located it, you need to disconnect the battery. There are two connectors that you will need to disconnect. The first connector is located near the front of the module, and the second connector is located near the back of the module. After you have disconnected the battery, you need to wait at least 10 minutes before reconnecting it. After 10 minutes have passed, you can reconnect the battery and then start your car. You should now be able to reset your convertible top BMW E46. If you are still having problems, you can try the following steps:
1. Disconnect the battery again and wait for 10 minutes.
2. Reconnect the battery and start your car.
3. Hold down the unlock button on your key fob until the convertible top is in the open position.
4. Close the convertible top and then hold down the lock button on your key fob until the convertible top is in the locked position.
5. Open and close the convertible top two or three times to make sure that it is working properly.
6. If you are still having problems, you can try resetting the module by using a jumper cable. Follow these steps:
1. Disconnect the battery again and wait 10 minutes.
2. Connect the positive end of a wire to terminal 4 in the trunk (this is labeled with a diagram).
3. Connect the other end of your jumper cable to terminal 30 on the module near the driver’s side door (labeled with red arrows).
4. Reconnect the battery and start your car.
5. Test to make sure that everything works properly. If not, repeat steps 1 through 4 and then test again until you get it right.

Silky Terrier Dog Breed Playing Aro... Silky Terrier Dog Breed Playing Around