To change the odometer, press the trip button on the left side of the instrument cluster. Turn off the engine. Turn the ignition switch to the on position and press the trip button. The odometer should indicate a need for service, and the maintenance light should be extinguished.

Silky Terrier Dog Breed Playing Aro... Silky Terrier Dog Breed Playing Around

What does the maintenance light mean on a 2007 Toyota Solara?

The maintenance light is letting you know that the vehicle’s scheduled maintenance is due, based on the number of miles you’ve driven. Read on for more helpful hints. For every 4,500 miles, the light illuminates for about 3 seconds and then flashes for about 15 seconds.

How do I clear my Toyota maintenance message?

Turn the key to the second position while pressing and holding the trip meter reset button on the dashboard. The odometer button must be held for a total of 10 seconds. Flashing, beeping, and then turning off the light should occur. Release the odometer button and start the car after it has been turned off.

How do I reset the check engine light on a 2006 Toyota Solara?

Activate the switch by pressing the switch to the on position. While the cable is off, hold this position for two minutes. Take a two-minute break and turn off the ignition. Afterwards, reconnect the negative wire.

How do you turn off the check engine light on a 2007 Toyota Camry?

Once you’ve inserted your key into the ignition, make three full turns to get the car into “ON” position. To start the vehicle, the battery cable must be connected to the engine and the key must be set. Check engine lights should be extinguished within a minute.

Does maint reqd mean?

A lot rides on the icon’s meaning, which is “MAINT REQD.” Scheduled maintenance is due when the MAINT REQD light illuminates. ToyotaCare may cover this service if your car is under two years old.