The electronic control system of a General Electric (GE) oven has detected a problem with the oven’s automatic door lock, which is why an F9 error code appears. When the oven is in “Clean” mode, the automatic door lock prevents the door from being opened.

Silky Terrier Dog Breed Playing Aro... Silky Terrier Dog Breed Playing Around

How do I fix error code F9?

Restart the Oven.If an electrical fault has magnetized the circuitry, then the F9 error code will pop up. The F9 error can be fixed by disconnecting the oven’s power for five minutes and resetting it.

How do I fix F9 on my GE oven?

Before re-connecting the oven, unplug it for 30 seconds. Turn off the oven’s electrical system and wait 30 seconds before turning it back on if necessary. Make a new oven selection to see if the error code reappears after the power is restored.

Why is my Whirlpool stove saying F9?

The F9, F9 E0, or PF Error Code may be displayed by the control during a power outage if the supply line “noise” is unusually high and the control detects it as an incorrect voltage amount.

What is F9 code on Kenmore oven?

Latch motor failure is indicated by the error code “F9.” The door did not lock, so open it and look for the plunger on the door light switch. Hold the door light plunger in place while pressing Clear/Off and keeping the door light plunger pressed in.

What does F9 E1 mean?

This indicates that the drain pump system is malfunctioning and that the washer is taking too long to drain water. It is possible that the drain will extend into the standpipe by more than four inches (114 millimeters). Ensure that the drain hoses are installed correctly in the plumbing.

How do I reset the error code on my GE oven?

Disconnecting the oven’s power for a few minutes is all it takes to perform a factory reset. The error code should go away once you re-plug the oven in.

How do you clear the code on a whirlpool F9?

Make sure the switches and wiring for the oven door lock are working properly. Make sure the lock switch isn’t stuck. Select “cancel” twice to clear the code FH, which indicates there is no water entering the machine or pressure switch trip.

How do I unlock my Kenmore oven?

For 20 to 30 seconds, press and hold the oven door light switch to disengage the lock mechanism, which is indicated by the DOOR LOC light. For as long as you hold the switch down, the latch motor will slowly retract your oven door lock.

What does F5 mean on Kenmore oven?

Ovens manufactured by General Electric have a “F5” error code if the oven’s safety circuit has broken down. If there is a power outage or an error in the lock circuit, this could happen. Plug your oven back in after 30 seconds of unplugging. Replace the lock circuit if the problem persists; the model number on your oven will help you locate the correct part.

What does f9 mean on washing machine?

Drain times are typically longer than eight (8) minutes when this error code is thrown.