It takes 3-4 hours to install a sprinkler system. The Sprinkler system is an important part of your home. It not only help you to protect the habitats in the house but also assist firefighters when there’s a fire accident. It’s very practical and eye-catching to install it at your home or building. If you are intending to set one up, it might be a good idea to know how long it takes to install a sprinkler system.

Silky Terrier Dog Breed Playing Aro... Silky Terrier Dog Breed Playing Around

The first thing you have to do is measure the length of each zone. Determine the number of heads, pipes, and valves that are required for that area. It is needed to think about where they will be placed before purchasing hoses or pipes. For example, if you need 40 feet of pipe then buy 50 feet just in case your calculations result in being cut short at one end or another.

The next step is laying out the supply line from the water main to the valve box location. Use rubber washers on fittings so as not to damage them with standard metal ones when tightening them up with wrenches which are open-ended crescent wrench preferred over adjustable types. Use a hacksaw to cut the pipe. Be sure that you are cutting the right size.

Then, install all valves/fittings/transition fitting at one end of each zone. Then connect pipes and hoses between zones until the system is completed. Connect hoses or pipes together with coupling or transition fittings. You can also use unions instead of couplings if easier to make valve boxes accessible for future repairs, cleaning, etc… The important thing is to create a fully connected system where the water supply can be controlled from one place only.

You should read the sprinkler installation manual before installing it because it includes a detailed description of how to install it properly. It describes everything about running supply lines, setting up watering patterns, laying out sprinklers, and all other important things you need to take into account.

That’s it! You can now turn on the water and check if everything is working properly.