1) Apply a hot opener to the longest side of the phone to remove the glue under the back glass.

Silky Terrier Dog Breed Playing Aro... Silky Terrier Dog Breed Playing Around

2) At next, you’ll be cutting through the glue attaching the back cover.

3) You’ll be cutting through the glue in the back.

4) Push a suction cup onto the rear flap. Raise the back cover’s bottom edge with your suction cup, creating a small space between both the back cover and the chassis.

5) Insert an aperture pick in the space you made and move it to the bottom right.

6) Insert a third aperture pick to avoid the glue from resealing throughout the remainder of the removal process.

7) After inserting just the tip of the opening pick, move it from the bottom left along the edge to the peak.

8) Slide the pick from around the upper corner and keep it like that to prevent the glue from retaping.

9) Gently raise the side of the back glass where the volume key is located.

10) Use the blade of a spudger to push up and detach the fingerprint scanner flex wire.

11) Remove the back glass.

12) Remove the eight Phillips #00 screws with a diameter of 4 mm. )

13) Removing the NFC antenna and charging coil from the plastic cover.

14) Pull up the battery flex wire with the flat side of a spudger and detach it from the battery.

15) Using a spudger with a flat end, pull up the flex wire that is situated at the top left-hand corner of the battery.

16) Using the spudger, work your way along the left side of the battery, loosening any glue that has become stuck.

17) Remove the battery and replace it with a fresh