Step 1: Take off the cover that is on the back.

• The cover should be removed from the rear, starting from the corner.
• Continue following the path to the left.
• Lift the cover from the back of the car.

Step 2. Unplug the fingerprint sensor

• Take off Kapton tape from fingerprint scanner cover

Disconnect the fingerprint sensor cable and place the back cover aside.

Step 3: Mid Frame screws

Step 4

• Make sure to insert the tool carefully onto the back of the phone, between the frame and LCD
• Continue to go down the sides of the phone, and then around the edges until the frame and LCD assembly are separated.

Step 5

• Take off Kapton tape from the battery plug
• Disconnect battery
• Connect another flex cable that is above the battery, no matter what it connects to

Step 6

• Connect this one
• Then this one

Step 7

• Disconnect the LCD flex cable

Step 8

• Take out the logic board.
• Easy
• The exciting portion…

Step 9 Battery Removal

Heating up the battery

Find the appropriate tool to break the battery

Step 10

Once you’ve found the correct tool, begin by removing the battery from either side of the battery.

Then, bend the battery back to ensure it doesn’t look awful in your photos.

Step 11 Charging Port Removal

• Remove the tape holding the charge board in place (red outline)
• Connect the charging port/antenna on the daughterboard.
• Remove the frame from the frame and put it aside

Step 12

• Take the digitizer’s by removing the flex cable
• Then, you can peel off the flex cable and then tweeze it away from that’s attached to the frame
• Remove the LCD Flex cable

Step 13

Slide something between the frame and the screen

Separate the LCD component from the frame, beginning at the lowermost point.

Step 14

• The digitizer cable is pushed through the frame
• Take off LCD assembly from the phone

Change the battery: It might be necessary to replace the battery in case it’s damaged or removed and inserted in the event that your phone isn’t working. Flip the back of your phone toward you. Hold the cover on the back and take it off. it. Hold the top of the battery and take it off. it.