How To Change Dome Light In 2007 Ford f150
Rachel Davis
The dome light and the map light are two features of the Ford F-150 or F-250 Super Duty that you won’t be able to be without. They work with your interior lighting and headlights and lighting for the driver and door lighting to ensure secure nighttime operation. Apart from helping you locate items in your vehicle the dome and map could aid in helping “light up” your vehicle in the event of an emergency in the dark. You might be surprised to learn that you could be issued a fix-it ticket if the lights don’t work! If you own a map light or dome that has gone out of service, you’ll likely have to replace the OEM lights that will follow and leave you in darkness. Replacing Dome Lights and Map Lights is a simple fix. The steps below will take you through this simple fix.
Silky Terrier Dog Breed Playing Aro... Silky Terrier Dog Breed Playing AroundStep 1
To protect yourself, before taking off the cover, be certain to shut off the lights. Also, make sure that your visors are not in the way. Place the edge of the screwdriver into the notch at the back edge of the Dome and Map light. Remove the transparent cover.
Step 2
The OEM bulbs cost around $6.00 for two packs of dome lights and $5.00 for two packs of map lights. If you have the cover removed you should take the time to replace the entire set. The entire OEM lighting system will last for approximately two years. Be careful to remove the old bulbs since they might fail, and then gently put in your new bulbs.
Pro-Tip
LED lights are more affordable than OEM lights because they last longer and are brighter. You might want to think about this alternative to light the lights in your Ford F-Series.
Step 3
When the cover is secured to the cover, you should test the bulbs. Re-light your lights and open the truck’s door and then open your truck’s doors. If everything is functioning you can reconnect the cover. If your map or dome lights don’t come back on It could indicate an issue with your vehicle. It’s possible that you need to check your wiring, fuses, and door switches that will turn on the lights when the door closes and opens.