Silky Terrier Dog Breed Playing Aro... Silky Terrier Dog Breed Playing Around

Unplug the tail light sockets:

The trunk lever should be pulled under the wheel’s column in order to unlock the trunk. With a flat-head screwdriver, take the screws that are made of plastic from the ends of the liner. they are just behind the lighting assembly for the tail. Retract the trunk liner to access the light sockets on the tail. Turn each socket counterclockwise before taking them off with care. If needed, remove the lower trim cover panel to let space.

Remove the headlight bulb assembly by unscrewing the bolts and pulling them off the surface bracket:

With the socket of 8 millimeters wrench, take off three bolts that are in the rear of each light. After that, you can slide the light assemblies away.

Make sure you install the brand new tail light.

Then slide in the taillight assembly that you just replaced. Install the Change the order of the lights and bolts, as described previously.

• Three bolts should be installed in 8 millimeters.

• Secure and attach the sockets of light bulbs

• Line the rear of the unit with the hatchback liner to secure it.

• Install the screw again.

Replace the tail light on the truck’s lid assembly:

If needed it is necessary, you can change the tail lights on the trunk lid lights as well. Remove the sockets the same way you removed those on the sides. Remove three bolts of 8mm from the assembly at each side of the trunk. Remove the tail light assemblies that were in use and put in the new ones, as they were with tail light assemblies on the sides.

Screw location for plastic.

Take a step back from the liner of your trunk.

Light sockets for the tail.

Unscrew the 8mm bolts.

Remove the taillight assembly and slide it away.

Take off from the assembly of tail lights

Install into the brand new tail lamp assembly into

Switch off the trunk lid light sockets.

Remove the bolts on the light tail assembly.

Remove the tail end of the trunk lid light assembly

Complementary Components:

• Brake Light and Tail Light: (dual filament)

• Rear Turn Signal/Blinker (amber color)

• Inverse light: (clear bulb)

Have you been involved in an accident of a minor nature that damaged the taillight on your 2008 or 2012 Honda Accord? If yes, this guide will guide you through a step-by-step guide on how to put in an appropriate taillight efficiently on your vehicle. Take note that this guide is suitable for novices and professionals.