Step 1: Cover

Find seams close to the feet that are on the side of the gadget.

Step 2

Utilize the spudger’s metal blade to gently push and lift the edges of the seam. The cover is secured by snaps made of plastic that sound like a pop when released. ! Start with the back part which will reveal two screws that must be removed prior to lifting the front part.

Step 3

• The case is the first piece of the case, gently pull from the sides of the box, rotating around the hinge, which is opposite to the opening seam as shown in the second photograph. The cover is held by snaps made of plastic. in the right position.
• In the second section of the case, there are two screws to be removed from the edge. After removal, the case will slide completely off without a lot of force.

Step 4

After the screws are removed The brass radiator will lift easily up.

Step 5: Battery

The zipper compartment contains 3 Phillips head screws measuring 9.7mm in diameter.

Unscrew them.

Step 6

The zipper panel contains eight additional 9.75mm Phillips head screws. Unscrew them and gently lift the cover of the battery. Two small screws secure this piece on the cover. To make it easier to handle in the future remove them, then gently pull the piece out to open the cover.

Step 7

Find the cable shown.

Step 8

Remove the battery of the device, and then thread it through the opening of the case in the same way as you would do this.

The battery’s initial life span was relatively short time as we don’t use the JBL often, so it was a bit disappointing.

If the button does not respond or only responds intermittently, take the device apart and check the contacts and rubber membrane for wear. Replace as required. There could be debris in the way of the button’s contacts.

It is the JBL Xtreme 3 Bluetooth not working issue that hinders you from connecting the device to your mobile. There are many reasons this happens, such as an empty battery, device not pairing, or the device is not in the range of.

It’s the JBL Xtreme 3 is a portable Bluetooth speaker that is specifically designed for use outdoors. It’s designed to be durable and comes with four drivers inside two passive radiators, enabling it to produce a powerful bass sound.