If you need to change your wiper blades on your 2016 Lexus RX 350, there are a few things you’ll need to know. The process is relatively simple, but there are a few steps you’ll need to take to make sure the job is done correctly. Here’s what you need to do:
1. Start by gently cleaning your wiper blades. Maybe they are working fine, but it isn’t a bad idea to start by gently cleaning the blade with some soap and water before you go any further. If there is any debris build up on them, it could cause problems with changing them out.
2. Determine if you need an adapter or not. Most Lexus RX 350s don’t require an adapter, but if you have a newer model that does you’ll need to make sure you have the correct tool before proceeding.
3. Locate the release tab on the wiper blade. This is typically located near the hinge of the blade, and it will be either a small metal tab or a small plastic piece that you need to press down on.
4. Pull the old wiper blade off its hinge. If you have an older model this could be a little difficult, but if your RX 350 doesn’t require an adapter it shouldn’t be too much trouble since there isn’t anything holding it in place other than the weight of the blade.
5. Install the new wiper blade by reversing the steps you took to remove the old one. Make sure that the hinge of the new blade is facing in the correct direction, and be careful not to pinch your fingers when folding it back into place.
6. Check to make sure the blades are properly seated before testing them out.
7. If the new blade doesn’t seem to be working you may need to adjust its angle. Sometimes dust and debris can get in between the actual wiper and the window, which will cause it not to work properly. You can try opening up your door and gently knocking some of this debris out while the window is down. Make sure that the blade is still in the correct position before closing the door.
8. Repeat these steps for the other wiper blade.

Silky Terrier Dog Breed Playing Aro... Silky Terrier Dog Breed Playing Around