For a variety of reasons, mixing different types of oils is not suggested. Conventional based oils have some contaminants by nature, and while they do contain some chemicals, the ingredients aren’t of the same high grade as those found in synthetics. It is necessary to jack up your BMW to change the oil. Even if you’re utilizing automobile ramps, secure the vehicle using jack stands. Allow time for the engine to cool. Set the parking brakes and secure the rear wheels using wheel chocks. Check for an access panel on your BMW.

Silky Terrier Dog Breed Playing Aro... Silky Terrier Dog Breed Playing Around

Remove the engine splash shield from beneath the engine. Remove the plastic shield under your vehicle’s engine if there isn’t an access panel. Allow at least 15 minutes for the engine oil to drain. On the drain bolt, replace the washer. Your engine oil filter should come with a new washer. The BMW oil filter tool is preferred, however, oil filter pliers will suffice. Replace the oil filter’s o rings. The new BMW oil filter will come with redesigned O rings. Insert the oil filter as well as compress it over to pressure around 25Nm. Replace the drain cover and screw that to the standards of the company.

The torque on a BMW oil drain bolt is typically 25 Nm (18.4 ft-lb). Engine oil should be added. Locate the oil fill cap and turn it counterclockwise to remove it. Begin by adding 6 quarts of water. Check the engine oil level after five minutes. Because some BMWs lack an oil dipstick, you’ll have to use the instrument cluster to check the oil level. Add oil as needed, and use the iDrive to monitor the engine oil level. Oil Service Reminder should be reset. You can start the engine once the oil level is correct. Reset the oil service reminder on your BMW.