Prefab fireplaces are similar to stoves. The fireplace is made from metal and may look similar to a brick. As with all appliances, their life spans are limited. They are more difficult to take apart because they are integrated into the house, and not left out in the open. Consult a professional if it is a gas-burning device.

Silky Terrier Dog Breed Playing Aro... Silky Terrier Dog Breed Playing Around

Prefabricated fireplaces can be made from metal boxes or firebrick panels. For ventilation, they are installed in walls using a metal flue or liner. Prefab fireplaces can either be removed from the front or back. You remove the fireplace will depend on its exterior. Siding is easier than brick exteriors. After installing a fireplace, you will need to remove all bricks. This may be simple or hard depending on the type and complexity of your face.

Examine the face to determine the best way to remove the fireplace surround. Three boards that face the wall should be removed using a pry bar. The pry bar should be placed in the upper left corner. Remove the boards from the wall. By working around the boards, you will eventually be in a position to remove the structure.

Pulverize the tiles with a hammer. Chip away any tiles that are stuck to walls. You should cut the drywall around the fireplace opening. After removing the tiles, you will need to apply a joint compound. Use the reciprocating saw to bore through brick and mortar around prefab fireplace perimeters Take out the metal pipe or flue from the top. Move the chimney chase pan cover to the roof. These covers protect the chimney from rain damage and metal flue.

Restain the interior of your house. The prefabricated metal structure should be removed from the opening. You may need to move the fireplace around, or use the pry bar for lifting it out. You can use the reciprocating saw to remove the flashing, water-resistant covers, and drywall. You must remove any insulation or other building material around the fireplace’s metal box.