The removal process is one of the easiest procedures to perform. All you need is a little time and patience.
The first step is to remove the airbag. There are four clips that hold it in place. Use a flat head screwdriver to pry them open. Once the clips are open, disconnect the airbag by pulling on the connector. Remove the airbag from the wheel.
The next step is to remove the three screws that hold the emblem in place. Use a Phillips head screwdriver to remove them. Once they are removed, pull on the emblem to remove it from the wheel.
Install the new emblem by reversing these steps. Make sure that you install it securely so that it does not come off again. Recon the airbag and replace the screws.
The whole process may take as little as thirty minutes. It is a simple procedure, but you will want to make sure that you take your time and do it properly. If the emblem is not replaced correctly, it could become loose and fall off while driving. That can be quite dangerous if it happens. The replacement part does not cost much money at all, so taking care of this problem now will save you money in the future.
There are several reasons why an emblem will need to be removed. The most common is to install a new one like mentioned above. Another reason may be if it came off and was lost during regular use. Perhaps you broke the original one when washing the car or vacuuming around it; this can happen if you do not take care of your BMW’s emblems.
The removal process is quite easy as long as you know what to do. If your emblem comes off unexpectedly, take it to your local auto parts store right away for assistance with replacing it. Many times they will have the part in stock; otherwise, they should be able to order one for you quickly so that you can get back out on the road safely.

Silky Terrier Dog Breed Playing Aro... Silky Terrier Dog Breed Playing Around