If you need to replace the windshield molding on your BMW, there are a few things you will need to know. The molding is attached to the car with clips, and it can be a little tricky to remove. Here is how to do it:

Silky Terrier Dog Breed Playing Aro... Silky Terrier Dog Breed Playing Around

1. Park the car in a safe place and make sure that it is level.
2. Remove the wipers.
3. Remove the screws that hold the molding in place. There may be a couple of screws on each end, as well as one in the center.
4. Remove the molding.
5. Install the new molding. Make sure that you install it in the same way that it came off.
6. Put the wipers back on and secure them with screws.
7. Test to make sure that the molding is installed correctly by moving the wipers up and down a few times. If there are any problems, remove everything and start over from step one.
8. Replace all of the other trim on the car.

Why do you need to replace this?

The windshield molding on your BMW is designed to keep bugs and other road debris from flying into the car through the front windshield. If it becomes damaged or breaks, it needs to be replaced. You will still have some protection if the molding has pieces missing, but you should replace it as soon as possible to avoid driving with an open window.

When should you replace it?

You should replace the windshield molding as soon as possible if it becomes damaged or breaks. If there are any pieces missing, they will not provide the same level of protection and you should replace them immediately. Driving with an open window is not safe, especially if you are on the highway.

How much does it cost?

The windshield molding on a BMW typically costs around $50 to replace. This may vary depending on the model of the car and the dealership. You can usually find windshield molding for sale at local auto parts stores.